COP ≈ HSPF2 ÷ 3.412. An HSPF2 of 7.5 is about 2.20 as a seasonal COP. This is a planning conversion; HSPF2 test conditions are not the same as a measured seasonal COP in your house.

HSPF2 is seasonal heating Btu per watt-hour under a standard test. Dividing by 3.412 (Btu in a watt-hour) gives a planning COP. Real homes, especially in cold climates, can come in lower, and backup heat is not in that single number.

Frequently asked questions

Is HSPF2 the same as the old HSPF?
No. HSPF2 uses a different test procedure and usually looks like a lower number than the old HSPF for the same equipment. Do not mix the two ratings in one conversion.
What COP should I enter in the heating calculator?
If you only have HSPF2, use this conversion as a starting point, then be more conservative in a cold climate. The heating cost calculator also suggests a climate-based default.